Added to Cart
Your item has been added.
The primary spacer for building out an 11.5" 5-segment rasp head.
The Pincott® R5S38DL is a 3/8" double-section air-cooled spacer for 11.5" diameter, 5-segment rasp hubs. At 3/8", it’s the thickest spacer in the R5 series, so it does most of the work of setting the blade gap across the hub. Pincott’s SIO-style hub assembly uses 25 of these with thinner spacers to fine-tune the fit. The vented construction pushes air through the rasp head, carrying away heat and buffed crumb. Your blades stay sharp longer, and casings come off the buffer with a consistent texture ready for bonding.
| Spec | Detail |
|---|---|
| Manufacturer | Pincott® |
| McGee Part # | R5S38DL |
| Ascot Part # | 613-00538 |
| Series | Standard Series Air-Cooled Spacer |
| Thickness | 3/8" |
| Section | Double |
| Hub Fit | 11.5" diameter, 5-segment (R115-style) |
| Compatible Blades | Pincott PTR11520, PTR11525, Smart I, Ultra I; B&J R115-20 / R115-25; Italmatic I-115-20 |
| Companion Sizes | R5S18SL (1/8" single), R5S316SL (3/16" single), R5S14DL (1/4" double) |
What’s the difference between single and double rasp spacers?
Double spacers come in the thicker sizes (1/4" and up) and set most of the blade gap. Single spacers (1/8"–3/16") fine-tune the stack so the rasp head tightens correctly on the hub.
How many spacers does an 11.5" 5-segment rasp head need?
It depends on the hub. For reference, Pincott’s SIO-style hub assembly (408107S) uses 25 R5S38DL spacers and 10 R5S316SL spacers. Check your hub’s specs or call McGee and we’ll help you match the setup.
How do I know my spacers are worn out?
Replace them when the thickness wears unevenly, when rubber dust has built up on the faces, or when you see cracks or other damage. Worn spacers change the blade gap and cause an inconsistent buff.